Engtin nge rail wrench hman ang?

A step-by-Railway maintenance lama mithiamte tan step guide

10.1.Railway procurement manager te, track maintenance supervisor te, leh field technician te hydraulic sleeper bolt wrench hmanga hnathawk (YLB-850 a ni.) chuan M22–M27 fastener-ah a dah a.

🔧 Step 1: Pre-Operation himna leh hmanrua enfiahna

• ✅ Wear PPE: Hard kawrfual, anti-vibration gloves, safety goggles
• ✅ Hydraulic hose leh socket lu (214mm/234mm) te enfiah rawh.
• ✅ Emergency stop leh torque limiter te chu test rawh.
• ✅ Torque dial chu "0" ah dah la - Max setting ah chuan start ngai suh ang che.

⚙️ Step 2: Positioning & Alignment .

Wrench base chu sleeper chungah flat takin dah la. 1000 a ni.Self-Mechanism lama hman dan inang lo tak tak a ni.(±15mm tolerance) chu bolt lu chungah socket center turin. Low-light zone (tunnels, zan hnathawh) ah chuan built- in activate rawh.LED hnathawh light ..

🎯 Step 3: Torque Setting & Direction Control .

Tightening atan:250–300 n·m (per 1000 ah dah a ni.EN 13481-1 a ni.), "Clockwise" tih kha thlang la, Trigger - Tool Auto-Speed ​​atanga Torque mode-a shifts kha hmet rawh.

Rusty bolt tan chuan:50% torque atanga tan → Pulse mode → 1000-ah a pung zauh zauh ang.850 n·m a sang ber a ni.(ylb-850 feature a ni). "Hammer" ngai suh, full force nen.

📊 Step 4: Hnathawh dan enfiahna .

Kut pahnih chu handle-ah dah rawh. Digital torque display chu en rawh. Grinding i hriat emaw, vibration tam lutuk emaw i hriat chuan chawlh nghal rawh. Dual-Socket model 1.1.YLB-850 a ni.) Switch zone-a 35% time save lovin bolt pahnih repositioning lovin hna thawk turin i thawk ang.

🧰 Step 5: Post-A enkawl dan tur .

• Hydraulic pressure chhuah tir .
• Socket te chu fai la, khuh rawh .
• Nitin oil level check thin ang che .
• Calibrate torque kar tin certified tester hmangin .

🚨 Safety hriat nawn tirna pawimawh tak .

• ❌ Overload venna bypass ngai suh .
• ❌ 3M clearance chu bystanders lakah dah la .
• ✅ Track possession window chhungah hna thawk reng rawh .
• ✅ Audit neihna tur torque logs enkawl (fra, DB Netz, CRCC)

📚 Engvangin nge hydraulic a awm? Standards & Reference te .

• UIC A hnah 712-1 a awm bawk.- Track machine te tan a him .
• OSHA 29 CFR 1910.147 a ni.- lockout/tagout tih dan tur .
• ISO 11202 a ni a.- Noise & Vibration Control .

💡 Engvangin nge rel team te hian YLB-850 an thlan dawn.

• ✅ 80–350 N·m Precision tihkhauh (±5%) a ni.
• ✅ 850 N·M Reverse torque a ni a, a chhungah hian rusted bolt a awm a.
• ✅ Dual-Lu socket: 214/234mm inkar a ni.
• ✅ 90kg lightweight - Tunnel & bridge siamna atana tha tak
• ✅ Digital Display + Auto-A zawm tur chuan chawlhsan rawh.

I track maintenance efficiency upgrade turin i inpeih em?

📧 Email:elinachina@126.com
📱 Whatsapp:+86 15617710309